Because there would not seem like any "Formal" Load Data out there for this Load, can a number of you give a starting point with this mix and things to think about when Doing the job this Load up?

H4831 will get the job done during the Swift but not true well. You are going to hardly ever obtain the pressures you'll need for consistency While using the .223. 760, or H414 will probably be greater but for many purpose I ain't the most significant enthusiast of most ball powders.

The reality that the H4831 is without a doubt a slower burning powder is precisely why you happen to be viewing higher velocities received with that powder, instead of what you've seen While using the IMR stuff. Also superior powder, but rather much better suited to a little bit scaled-down conditions using a little bit less ability.

Operate your load up with the precise powder (sc or regular) and great deal that you are using although. Exact same burn up charge doesn't mean it's going to behave "accurately" the same. I have found around a hundred fps distinction between sc and mil-surp a great deal of H4831.

In any case, I knew The 2 kilos of H4831SC used the exact same data, but I did not know whether there was anything different in between a pound of powder labeled "Intense" and 1 not so labeled. A simply call to Hodgdon confirmed that they had been actually equivalent and the only real variance was The emblem about the label.

Any load data to support that? My initially thought is it's actually not going to melt away each of the way and velocities are going to be slow and in every single place. May be a pleasant fireworks Display screen!

I do not like to operate up a load employing one wide range of h4831sc powder and after that have to operate up again mainly because I run out and also have to start using a new whole lot range.

In actual fact, it's even a good idea to back down and function up securely if you go from one particular ton to a different large amount of the identical powder.

Chances are you'll either: one) Carry on and also have the firearm(s) listed under automatically removed from your procuring cart:

The 55grs is all h4831sc load data of that I shoot from my swift. Other manuals I feel that they have got slowed down the swift to indicate that their rifles are better. It bug the hell away from me. I realize better. This is exactly why I don't at any time h4831sc throw out my more mature manuals. I do invest in new manual continuously to stay up on new chambers and there loading. I exploit this 39grs in summers @ 100+ levels without any challenges.

Operate your load up with the specific powder (sc or common) and good deal you are working with even though. Exact burn up rate doesn't suggest it will behave "particularly" exactly the same. I have noticed about 100 fps difference between sc and mil-surp many H4831.

This is certainly an Extraordinary extruded propellant and features heightened insensitivity to cold and warm temperatures.

I do know the H4831SC offers a much better load density But I believe I've more than enough place in my scenario for the normal H4831.

IMR4831 and H4831SC are distinctive. Where you might be perplexing it and thinking that it's close is H4831 and H4831SC are very comparable. These two are just about exactly the same except H4831SC is made to smaller grains so it meters easier.